UUED TOOTED > Kallutatav käsifrees OFL3.0 & Suhner UAL 23 RF

Kallutatav käsifrees OFL3.0 & Suhner UAL 23 RF

Kallutatav käsifrees OFL3.0 & Suhner UAL 23 RF

Tootekood

€ kmta

€ kmga

Tartu
laos

Osta

TTB.1S10021 895.00 1091.90 0

Pivoting router lift OFL3.0 for your router table

The first and only one of its kind - pivoting router lift from -5 to 50 degrees

The OFL3.0 for  motors with 43 mm clamping neck including swivel mechanism as only professional tables have been able to do until now. Massive and well manufactured. Ideal for small workshops or due to low set-up and configuration times also ideal next to the large bench routing machines - Made in Germany!

Why this lift?

  • Pivots from -5 to 50
  • Classic snap-in points 22.5°, 30°, 45° and 90°
  • No Routing depth loss!
  • Easiest  cutter change thanks to upward looking  spindle and collet chuck!
  • Innumerable possibilities - grooves, rebating, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!

Simple operation of the router lift

  • Height adjustment via rotary handle above.
  • Angle locking via a lever below.
  • Centering in the slotted hole by means of two levers also below.

TECHNICAL DATA

  • Dimension insert plate: 306 x 229 x 9 mm
  • Corner radius of insert plate: 6 mm
  • Height adjustment travel/rotation: 4 mm
  • Max. Adjustment travel: 101 mm
  • Height router lift (max. extended): 240mm
  • Max. Cutter diameter: 55 mm
  • Weight: approx. 5 kg

Further advantages and characteristics:

  • Quality from Germany
    High quality, solid construction. Construction of high quality aluminium and steel.
  • Fine height adjustment to 1/10mm
    Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw.
  • Smooth-running spindle columns
    Enable a stepless and exact fine height adjustment.
  • Fits in (almost) every Router Table
    Robust, anodised aluminium insert plate in the familiar outline dimensions of 306 x 229 mm and thus interchangeable with our previous insert plates (e.g. FO-RTS2 or T-RTI-PLATE) --> no more is Routingneeded.
  • Compatible to common Routing
    The OFL3.0 is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
  • Safe Routing for any diameter
    The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated!
  • Assembly made easy
    Simple mounting of the milling cutter to the mounting adapter.
  • Routing also without rip fence
    2 drill holes for the fence pin allow you to free e.fräseng. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes).
  • Absolutely flat
    Easy levelling of the OFL3.0 by levelling screws in the insert plate. Optionally a frame for a permanent level adjustment can be purchased.
  • No own drillings necessary
    Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
  • Lasered scaling
    Millimeter scaling on the surface for exact alignment of the rip fence.
  • Additional recessed grip for easy changing of the reduction plates.
  • Magnetism for mounting additional accessories is distributed over the entire reduction plate.
  • Additional recessed grip for easy changing of the reduction plates.
  • Magnetism for mounting additional accessories is distributed over the entire reduction plate.

Directly compatible and approved milling motors:

    • Cress: 530 FM, 800 FME, 1050 FME
    • MAFELL: FM 800, FM 1000
    • SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAL 23 RF
    • Trend T4EK.
      • If your motor is not listed, please check the tolerances of the clamping neck to your model as specified by the manufacturer or contact us.

Delivery Includes :

  • 1x Router lift OFL3.0
  • 2x reduction plates long hole Ø 16 and 32
  • 1x reducing plate Ø 68 mm
  • 1x hexagon screwdriver 5x150 mm
  • 4x fixing screws M6x50, washers and nuts
  • 8x levelling screws M5x8
  • 1x instruction manual (German)

 

Built-in routing motor UAL with 1.800 Watt for lifting baskets, Router Tables and CNC machines

Routing motor Suhner type UAL 23 RF

Industrial  motor with maximum power and endurance from Otto Suhner with 43mm clamping neck for stationary use in Router Table CNC units, Drilling jigs or in combination with a lifting cage as a heavy-duty manual router of the top class.
Genuinely "Made in Germany" for trade and industry.

Technical data:

  • Input power: 1.800 Watt
  • Speed infinitely variable: 2,500 - 23,000 rpm
  • Torque: 0.73 Nm
  • Voltage: 230 Volt / 60 Hz
  • Collet chuck: 8 mm
  • 10 mm and 12 mm OPTIONAL
  • Weight: 4,8 kg

Features:

  • Protection-insulated universal motor with extremely high efficiency - unrivalled in robustness and effectiveness.
  • Extremely powerful, enormously powerful motor with large power reserve and compact design.
  • Very stable clamping neck Ø 43 mm (standard) in steel design - for installation in drill rigs, CNC and milling fixtures.
  • Precision double ball bearings - for powerful and highly accurate routing.
  • Tool holder with classic collets with clamping nut for optimum guidance of the toolschaftand precise concentricity.
  • Exact concentricity even under the heaviest loads - guarantees results and safety.
  • Ideally suited for heavy routing operations in window construction, in the furniture industry, for dowel and profile mrouting, for edge processing, etc.
  • Design incl. tacho control electronics for constant working speeds for even cutting speeds, very quiet running, anti-lock protection, soft start for jerk-free Start-up, fast clocking and PTC thermal monitoring.

Delivery Includes :
1x router motor, 1x collet 8 mm, operating tool