The UNI 1 is an electronic multipurpose meter for three measured values to which active electrodes for measuring structural moisture, air humidity, and temperature may be connected.
The following (active) electrodes may be connected:
-
B 50, B 60, LB 70 for non-destructive measurement and display of moisture in ceilings, walls, floors, or other building materials
-
MB 35 for concrete surface moisture measurement only
-
MH 34 for measuring high moisture values (40 to 200%) in coniferous wood only
-
IR 40 EL for sensing surface temperature, thermal bridges, and dew point temperature
-
RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex for air humidity and air temperature measurement and
-
all of our Pt100 temperature sensors
Particularly suited for air conditioning technicians, surveyors who evaluate damage caused by water, insurance companies, and as a supplement for a wood moisture meter.
MEASURING RANGE
WOOD MOISTURE:
-
40 – 200% (dry mass) using MH 34]
STRUCTURAL MOISTURE:
-
0 to 199 digits (scanning range)
-
0.3 to 8.5 wt.-% or
-
0.3 to 6.5.0 CM-% using B 50, B 60, LB 70
-
2 to 8 wt.-% using MB 35 on concrete surfaces
AIR HUMIDITY:
-
0 to 100% R.H. using RF-T 28 EL, RH-T 37 EL, RH-T 37 EL flex
TEMPERATURE:
-
-50 to +600 °C depending on the Pt100 temperature sensor
-
Infrared measuring range: -20 to +199.9 °C using IR 40 EL
PROPERTIES
-
Quick measurement of moisture in set building materials using the capacitive radio frequency measuring technique
-
The temperature measurement precision is achieved by Pt100 measuring resistors connected in 4-wire technology
-
Housing: 140 [L] x 90 [W] x 42/50 mm [H]